Configure IP Address Automatically (DHCP) on Solaris 11
Command to Enable Manual Profile(Enable Manual NCP) and static IP (Plumb Interface)
#netadm enable -p ncp DefaultFixed
Command shows the physical network cards that are installed on your system
#dladm show-phys
Command show the datalink on your System and status
#dladm show-link
Create and enable IP address on Network Card
#ipadm create-ip (Interface_Class) net0 (Interface_Name)
[Interface Class]
- – IP Interface (create_ip)
- – STREAMS Virtual Network Driver (create_vni)
- – IPMP Interface (create_ipmp)
#ipadm create-ip net0
Command to Add IP Address to interface
#ipadm create-addr -T (Address_type) -a (IP_Address/[Subnet|prefixlen]) netwrk_Card_name (DataLink_name)
#ipadm create-addr -T static -a 192.168.1.1/24 net0/v4static
Command to display General status for interface
#ipadm show-if
Command to display IP address assign to interface
#ipadm show-addr
Configure IP Address Automatically (DHCP) on Solaris 11
Command to disable Manual Profile(Enable Automatic NCP) and DHCP IP (Plumb Interface)
# netadm enable -p ncp Automatic
Command shows the physical network cards that are installed on your system
#dladm show-phys
Command show the datalink on your System and status
#dladm show-link
Create and enable IP address on Network Card
#ipadm create-ip net0
Command to Sssign Automatic IP (DHCP) to interface
#ipadm create-addr -T dhcp net0/dhcp